Reliable power, when you need it most.
If you are thinking about purchasing a generator to provide emergency power to your CT home or business, you will need a generator transfer switch to safely supply the necessary power.
At L-Train Electric in CT, we sell, service, and install transfer switches. We work with you to determine which transfer switch will best suit your needs and make recommendations about the different models that we offer. Our factory trained professionals will explain how the switches operate and address any questions or concerns.
A generator transfer switch powers your generator during black outs, brown outs or other power outages. It is connected to both utility power and your generator. A transfer switch will isolate each type of power to prevent backfeeding. The National Electrical Code (NEC) requires a transfer switch if you have more than one source of power feeding into your home. It is illegal to have a generator connected directly to electrical wiring without a transfer switch because it can cause backfeeding. Backfeeding occurs when you supply electricity from your electrical system back into the utility lines. It is an electrical hazard for utility workers as well as your neighbors who are unaware that voltage is present on the line. Your generator can even be damaged if power is restored while backfeeding is occurring.
Transfer switches range from 50 to 200 amps. The size of your transfer switch will depend upon many things including: the size of your utility service, the appliances you wish to operate and the size of generator. If you are looking to power your entire house, 100 to 200 amp transfer switches will be more appropriate.
There are three main types of transfer switches: manual switches, automatic switches and a manual and automatic combination switches. Automatic transfer switches have the obvious advantage of automatically transferring between utility power and generator power when the power goes out and switching back when the power returns. However, manual switches and combination switches allow for more flexibility in use. Maintain power to critical electrical appliances before the next power outage with a safely installed generator and transfer switch by L-Train Electric.
Generac’s Pre-Wired Switch is an automatic transfer switch and distributed load center that backs up selected circuits for essential circuit coverage. Pre-wired for the easiest and least expensive installation on the market, they are an excellent value when whole house coverage is unnecessary.
Transfer switches need to be serviced and maintained as well. This is one of the most critical parts of your generator system, without a functioning transfer switch your system will not run. With our maintenance plans we will inspect and lube all moving parts on your Transfer Switch to provide maximum performance